Grandstream Networks GXV-3000 - Manual (Page 34)

GXV-3000 User Manual Wind Currents Communications, Inc.
- 34 -
Syslog Level Select the ATA to report the log level. Default is NONE. The level is one of DE-
BUG, INFO, WARNING or ERROR. Syslog messages are sent based on the follow-
ing events:
• product model/version on boot up (INFO level)
• NAT related info (INFO level)
• sent or received SIP message (DEBUG level)
• SIP message summary (INFO level)
• inbound and outbound calls (INFO level)
• registration status change (INFO level)
• negotiated codec (INFO level)
• Ethernet link up (INFO level)
• SLIC chip exception (WARNING and ERROR levels)
• memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components:
GS_LOG: [device MAC address][error code] error message
Here is an example: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000] Ethernet link is up
NTP server This parameter defines the URI or IP address of the NTP (Network Time Protocol)
server which is used by GXV-3000 to display the current date/time.
Distinctive
Ring Tone Customer Ring Tone 1 to 3 with associate Caller ID: when selected, if Caller ID is
configured, then the device will ONLY sound this ring tone when the incoming call
is from the Caller ID, device will use System Ring Tone for all other calls.
When selected but no Caller ID is configured, the selected ring tone will be used for
all incoming calls.
Disable Call
Waiting Default is No. If set to Yes, the call waiting will be disabled.