Gefen 4x2 HDMI - Manual (Page 13)

10
RS-232 SERIAL COMMUNICATION COMMANDS
Switching/Routing Binary Table
ASCII RMT-4IR
Button
Binary
1 1 0011 0001
2 2 0011 0010
3 3 0011 0011
4 4 0011 0100
EDID Management Modes
All DIP switches inside the unit must be in their default OFF position. Use the ASCII
commands below to change the EDID modes. For a description of each mode please
see page 8.
ASCII EDID Mode
m0 0
m1 1
m2 2
m3 3
m4 4
m5 5
m6 6
m7 7
IR Remote Channel Confi guration
All DIP switches inside the unit must be in their default OFF position. Use the ASCII
commands below to change the IR code channel. Please ensure that the IR remote
channel on the RMT-4IR matches any channel that is set by these commands. For a
description of the IR code channel confi guration please see page 6.
ASCII Remote Channel
r1 1
r2 2
r3 3
r4 4