Gefen Firewire 800 Extender Plus EXT-FW-1394BP - Manual (Page 9)

5
1 Power LED
This LED will become active once the included power adapter has been connected.
2 Status LED
This LED will become active once a stable link has been established between the sending
and receiving units.
3 Fiber Optic TX and RX Inputs
Connect a LC terminated fiber optic cable for both the transmit (TX) and receive (RX)
signals between the Firewire 800 sending and receiving units.
4 12V DC Power Supply Input
Input for the supplied 12V DC power adapter.
5 Firewire Input
Connects to a Firewire hub, or Firewire device.
6 Firewire Input
Connects to a Firewire hub, or Firewire device.
SENDER PANEL DESCRIPTIONS