Gefen Firewire 800 Extender Plus EXT-FW-1394BP - Manual (Page 11)

7
1 Fiber Optic TX and RX Ports 1
Connect a LC terminated fiber optic cable for both the transmit (TX) and receive (RX)
signals between the Firewire 800 sending and receiving units. Optionally, this port can be
used for extension to another Receiving unit to extend the signal.
2 Fiber Optic TX and RX Ports 2
Connect a LC terminated fiber optic cable for both the transmit (TX) and receive (RX)
signals between the Firewire 800 sending and receiving units. Optionally, this port can be
used for extension to another Receiving unit to extend the signal.
3 12V DC Power Supply Input
Input for the supplied 12V DC power adapter.
4 Firewire Input
Connects to a Firewire hub, or Firewire device.
5 Power LED
This LED will become active once the included power adapter has been connected.
6 Status LED
This LED will become active once a stable link has been established between the sending
and receiving units.
RECEIVER PANEL DESCRIPTIONS