GE GNSR2140 - Manual (Page 7)

About the control panel—for model GWSE5190.
www.geappliances.ca
• Add detergent
• Add diluted fabric
softener (on models
with a fabric
softener dispenser)
• Add clothes
• Select load size and
other wash options
• Select wash cycle
• Close lid
• Push START button
NOTE: When making a selection with any knob, simply point the knob anywhere within the shaded range for that setting.
Quick Start Guide
Model GWSE5190
Color Logic
Select the correct TEMPERATURE setting. Match the particular color below the words with the same color
on the Cycle Selector knob.
Example: Washing a load of medium soiled cotton towels and sheets.
Choose the LOAD SIZE.
Choose the TEMPERATURE setting—for this load it would be the HOT-COLD (which is a particular color).
Turn the Cycle Selector knob to the area that has the same color as the TEMPERATURE setting you have
chosen—for this load it would be the COTTONS area. Turn the knob to the MEDIUM setting.
Load Size
Loosely load clothes no higher than the top row of holes in the washer basket. The water level should just
cover the clothes. Adjust the load size accordingly.
Temperature
Select the water temperature for the wash and rinse cycles. Always follow fabric manufacturer’s care label
or instructions when laundering.
3
2
1
About the control settings.
7