Grizzly H6069 - Manual (Page 5)

Model H6069 Wet Sharpener -3 -
Operating this sharpener can propel
objects into the air, causing imme-
diate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when oper-
ating this equipment.
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safety
first, as it applies to your individual
working conditions. Use this and
other machinery with caution and
respect. Failure to do so could result
in serious personal injury, damage
to equipment or poor work results.
1. READ THIS MANUAL. This man-
ual contains proper operating
instructions for this machine.
2. DO NOT jam the workpiece against
the sharpening surface. Firmly
grasp the workpiece in both hands
and ease it against the sharpener
using light pressure.
3. DO NOT wear loose clothing while
operating this machine. Roll up or
button sleeves at the cuff.
4. DO NOT place hands near, or in
contact with, sharpening surfaces
during operation.
5. GRIP THE WORKPIECE WITH
BOTH HANDS.
Additional Safety Instructions For
Wet Sharpeners
6. PERFORM machine inspections
and maintenance service promptly
as required.
7. NEVER leave the machine running
unattended.
8. REPLACE sharpening wheel as
needed.
9. NEVER sharpen more than one
item at a time.
10. ALWAYS disconnect the machine
from the power source before
changing the sharpening wheel or
adding water to the reservoir.
11. ALWAYS test run the machine
before starting any work.