beautypg.com

Installation instructions, Installing the stack bracket kit – GE UPVH890 User Manual

Page 39

background image

Installation Instructions

39

INSTALLATION PREPARATION

Remove the packaging.

Flatten the product carton to use as a pad to lay
the dryer down on its side. Continue using the
carton to protect the finished floor in front of
the installation location.

KIT CONTENTS

Right hand bracket

Left hand bracket

4 rubber pads

4 #12 x 1

″ screws

4 #8 x 1/2

″ screws

TOOLS YOU WILL NEED

Phillips screwdriver

Open-ended wrench

Pliers

Gloves

Level

INSTALLING THE STACK
BRACKET KIT

REMOVE THE DRYER LEVELING LEGS

A. Carefully lay the dryer on its side. Use the

packing material so you don’t scratch the finish
on the dryer.

1

B. Use an open-end wrench or pliers to remove

the dryer leveling legs.

Back out and remove
all 4 leveling legs

INSTALL RUBBER PADS
TO DRYER BASE

Locate the 4 rubber pads in the parts package.
Remove the adhesive backing and firmly place
over on the bracket where you removed the
leveling legs.

2