beautypg.com

Warning, Installation instructions, Caution – GE UPVH890 User Manual

Page 29: Side venting (cont.), Bottom venting

background image

WARNING –

NEVER LEAVE

THE BACK OPENING WITHOUT THE PLATE.

(Kit WE1M454)

Installation Instructions

29

SIDE VENTING (cont.)

Connect standard metal elbows and ducts to
complete the exhaust system. Cover back opening
with a plate (Kit WE1M454) available from your
local service provider. Place dryer in final location.

ADDING COVER PLATE TO REAR OF CABINET
(SIDE EXHAUST)

ADDING ELBOW AND DUCT FOR EXHAUST
TO LEFT OR RIGHT SIDE OF CABINET (cont.)

Plate
(Kit WE1M454)

Apply duct tape as

shown on the joint
between the dryer
internal duct and
the elbow, and also
the joint between the
elbow and the side duct.

CAUTION:

Internal duct joints

must be secured with tape; otherwise, they may
separate and cause a safety hazard.

Duct tape

WARNING –

BEFORE

PERFORMING THIS EXHAUST INSTALLATION,
BE SURE TO DISCONNECT THE DRYER FROM ITS
ELECTRICAL SUPPLY. PROTECT YOUR HANDS
AND ARMS FROM SHARP EDGES WHEN
WORKING INSIDE THE CABINET. BE SURE
TO WEAR GLOVES.

BOTTOM VENTING:

Dryer Exhaust to the bottom of cabinet
for Gas and Electric models.

Remove the screw inside the dryer exhaust duct
and save. Pull the duct out of the dryer. Detach
and remove the bottom knockout.

Remove
screw
and save

Remove desired
knockout (one only)

Fixing hole

Cut the duct as shown and keep portion A.

A

12

3

8

Bottom