GE 24116 - Manual (Page 7)

7
Direct Code Entry
1....Press.and.hold.the. SETUP.button.until.the.red.
indicator.stays.on,.then.release.the SETUP.button.
2....Press.and.release.the.desired.mode.button.( TV,
DVD,.etc.)..The.red.indicator.blinks,.then.stays.lit...
3.. Enter.the.4-digit.code.from.the.code.tables.(on.
separate.sheet)..Note:.After.a.valid.code.entry,.the.
red.indicator.turns.off...For.an.invalid.code,.the.red.
indicator.flashes.
4.. With.your.device.on,.press CHAN UP..If.the.device.
responds,.no.further.programming.is.required..
Note:.If.some.buttons.do.not.operate.your.
equipment,.try.one.of.the.other.codes.for.your.
brand.
Write.your.codes.down.here.for.easy.reference.later.
Device. Device.stored. Code
TV. . TV
DVD.
CBL/SAT
DVR/AUX