GE 24116 - Manual (Page 13)

Troubleshooting
Remote does not operate your product.
•.. Press.the.mode.button.of.the.product.you.want.to.
control.
•.. Program.the.remote.with.a.new.code.
•.. Install.new.batteries..(You.might.have.to.
reprogram.your.remote.after.installing.new.
batteries.)
•.. Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your
product.
•.. Program.remote.with.a.new.code.
•.. Remote.may.not.be.able.to.operate.all.features.of.
your.product.or.button.names.might.be.different.
than.your.product.
Red Indicator blinks after you program a product
code.
•.. Remote.did.not.accept.the.code.
•.. Try.to.program.the.code.again.or.try.a.different.
code.
Lost Your Codes?
Enclosed.with.this.remote.is.a.sticker.on.which.
you.should.write.the.codes.for.each.device.you.
programmed..Apply.the.sticker.to.the.back.of.
the.remote.or.somewhere.convenient.for.future.
reference.
Also.on.the.sticker.is.our.website.address.which,.
should.you.lose.your.codes.or.programming.
instructions,.you.can.find.available.on.our.website:
www.jascoproducts.com
13