3 cleaning and maintenance – Graco ISPC089BA User Manual

Page 42

Text mode
Original mode

7.3 Cleaning and Maintenance

TO REMOVE AND WASH INFANT RESTRAINT PAD, follow

instructions in “6.1 Positioning
Harness Straps”, p. 27-30.
On 5-point harness models,
push aside the small tab that
holds the anchor buckles in
place

and pull the anchor

buckles out of their indentations.
Push a corner of each anchor
buckle back into its slot

Carefully remove the seat pad. Machine wash on
delicate cycle and drip-dry. DO NOT USE BLEACH.

Reverse steps to reinstall seat pad. Check that harness system is not
twisted, and pull on harness system to be sure harness is securely
reinstalled.

Repeat step 3 for LATCH with
adjustment belt. After fastening onto
storage bar, pull on adjustment belt to
make sure LATCH is securely fastened.

LATCH storage should look like this
when complete

Underside of base