GE 27951 - Manual (Page 23)

Registration
NOTE: The following procedures can ONLY be done with the
27950 or 27951 .
A cordless handset will not operate until it is registered to the base.
During the registration process, keep the handset near the base.
Up to cordless handsets can be registered to one base.
NOTE: If a handset is not registered; Not Register flashes
on the display and if the TALk button on the handset is
pressed, it will display Unavailable.
1. Make sure your phone is OFF (not in talk mode).
. Press the MENU button to go to the main menu and use CID/
VOL ( + or - ) button to scroll to Registration.
. Press MENU button to confirm and you may program the
following items: Register and Remove handset.
Register
From the Registration Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Register sub-
menu.
. Press MENU button to enter the menu.
. Press and hold the PAGE button on base for 5 seconds.
. The charge/in use indicator will flash slowly for minutes which
shows the base is in registration mode.
5. If the registration is successful, the handset shows Successful
and emits a confirmation tone for seconds.
6. If the registration is failed (i.e. timeout), the handset shows “ No
base” and emits an error tone.