English, Integrated peripherals, Cpu hyper-threading – GIGABYTE 8S648FX-RZ User Manual
Page 24: Init display first, Ide1 conductor cable, Ide2 conductor cable, On-chip primary pci ide, On-chip secondary pci ide
- 24 -
8S648FX-RZ Series Motherboard
English
CPU Hyper-Threading
Enabled
Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)
Disabled
Disables CPU Hyper Threading.
Init Display First
Select the first initation of monitor or display from AGP or PCI VGA card.
AGP
Set Init display first to AGP. (Default value)
PCI
Set Init display first to PCI.
Integrated Peripherals
IDE1 Conductor Cable
Auto
Will be automatically detected by BIOS. (Default value)
ATA66/100
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).
ATA33
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS. (Default value)
ATA66/100
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).
ATA33
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
IDE1 Conductor Cable
[Auto]
IDE2 Conductor Cable
[Auto]
On-Chip Primary PCI IDE
[Enabled]
On-Chip Secondary PCI IDE
[Enabled]
AC97 Audio
[Enabled]
Onboard LAN device
*
[Enabled]
USB Controller
[Enabled]
USB Legacy Support
[Disabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
x
ECP Mode Use DMA
3
Game Port Address
[201]
Midi Port Address
[330]
Midi Port IRQ
[10]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Save Default
F7: Optimized Defaults
Item Help
Menu Level
`
[Auto]
Auto-detect IDE
cable type
[ATA66/100/133]
Set Conductor cable
to ATA66/100/133(80
-pins)
[ATA33]
Set Conductor cable
to ATA33(40-pins)
"*" Only for 8S648FX-RZ.