Great Dane Chariot / Chariot LX GDRZ61-27KHE - Manual (Page 28)

Service Lubrication - 24
SERVICE LUBRICATION
Service Lubrication
Grease
Use a general all-purpose grease with an NLGI grade No. 2
rating.
Wet or high-speed conditions may require use of a special-
use grease. Contact your servicing dealer for information.
Spray Lubricant
Use a general-purpose petroleum-based spray lubricant.
Lubrication Points
MX15286
• Chariot LX only: Grease caster wheel bearings (A).
• Grease caster wheel spindle bearings (B).
MX15289
• Grease HOC shafts (C) (two points on each side of the
machine).
MX15319
• Grease mower deck thrust arms (D), located at the rear
of the mower deck.
MX15287
• Apply grease to three spindle bearings (E), until grease
is expelled from vent (F) on spindle housings.
MX15320
• Grease traction drive belt tension arm pivot (G).
IMPORTANT: Avoid damage! If operating outside
that temperature range, contact your servicing
dealer for a special-use grease.
A
B
C
D
F
E
G