GIGABYTE AirCruiser G GN-WB01GS - Manual (Page 16)

13
Use Client Certificate: This certificate is necessary for TLS and an option for PEPA and
TTLS. Check “Use Client Certificate” to verify the authenticity of a Client Certificate during
the authentication process.
Clicking More will open the Client Certificate Selection Window (shown in Figure 3-7).
Users can select one suitable certificate as Client Certificate. (Default: OFF)
Tunnel Authentication: PEPA and TTLS use two-step authentication method. The first
step is that Server sets up a Tunnel with its authentication. No option is need to be
set for Client (the PC with the Adapter). The second step is to confirm the validity of
Client with assigned authentication type in the Tunnel. Data needed for
authentication includes Tunnel ID, Tunnel Password, Client Certificate or Server
Authentication.
Protocol: Use assigned authentication type in the safe tunnel.
Tunnel ID: Users’ accounts.
Password: Passwords for users’ accounts.
Figure 3-6. Client Certificate Selection List
3-1-2-2. 802.1x Settings - CA Server Tab
CA Server is used when TLS, TTLS or PEAP is in use. When Use certificate chain is
checked, the Client can verify if such server is reliable and then transmit Client Certificate
after the verification is confirmed.