GSI Outdoors PNEG-951 User Manual

Page 21

PNEG-951

Pressing the

button while the system is stopped, will give you four setup screens. These are:

This screen is used to clear your batch counter. You may want to do this at the start of the drying season

to keep an accurate count of the batches ran through your dryer during the drying season. Press the

button to clear it or just press the

button to keep your total batch count.

The next screen allows you to clear the total amount of bushels that your dryer has recorded. Press the

button to clear it or just press the

button to keep your total bushels count.

This screen is used to customize your dryer with the name of your farm or company. This message will contain the
serial number of the dryer when it leaves the factory but can be changed to anything message

you like. Use the

to change the character above the flashing cursor. To move the

cursor, press the

button to advance to the next character or the

button to back up to the

previous character on the line. When you have finished entering your custom message press

to accept

the changes.

Press the

button to accept the new setting.

SETUP BUTTON