GE KTC-117V3 - Manual (Page 14)

Making Cable Connections KTC Compact Cameras
14 1041075C / November 2003
4) Loosen the ~AC24V terminal connectors on the terminal block and
connect the power cable to them.
5) Tighten the terminal connector screws until snug, ensuring that the
power leads are secure.
6) Connect the other end of the power cable to the power supply unit
and tighten the connector screws until snug.
7) Supply power to the camera.
Note: When you supply power to the camera the PWR LED illuminates. If the PWR
LED does not illuminate, check the terminal block connections and power source.