GE KTC-117V3 - Manual (Page 10)

Installing the Bracket and Camera KTC-117/217/247 User Manual
10 1041075C / November 2003
4.1 M OUNTING THE B RACKET
1) Unscrew the mounting plate
(Figure 8) from the rest of the
bracket.
2) Place the mounting plate against
the vertical or horizontal
mounting surface and mark the
location of the three mounting
holes.
Note: The camera comes with fasteners
and anchors; use only if they are
appropriate for the type of mounting
surface.
3) Prepare the mounting holes
appropriately according to the
type of surface (concrete, wood,
etc.) and fasteners used.
4) Attach the mounting plate to the
mounting surface. See Figure 9.
Note: To adjust the length of the bracket,
remove one or both of the optional post
extensions from the bracket.
5) Attach the other pieces of the
bracket to the mounting plate.
See Figure 10.
Lock ring
Ball and socket
bolt
Wing nut
Optional post
extensions
Mounting plate
Figure 8. Bracket parts
Mounting
fasteners (3)
Figure 9. Attaching the mounting plate
to the mounting surface
Figure 10. Mounted bracket