GE 49-8549 - Manual (Page 9)

for Using Settings
HI--–Quick start brings water to boil.
and maintains boil
temperatures increase with the
units on. With units
on, surface temperatures are high so be
touching the hot surface
indicator remain lit after the surface unit
is to touch.
●
At Medium Low, LO settings, melt chocolate and
butter on a small surface unit.
When surface unit is turned on, the unit be
seen glowing red within a few seconds. The red
will turn on and off (cycling) to maintain the
selected heat setting. With poor cookware, you
see frequent cycling of the unit off and on. Good,
cookware will minimize the cycling. See the
Surface Cookware Tips section.
It is safe to hot cookware from the oven or
surface on the glass ceramic surface when it is cool.
Medium
Low
OFF
LO
.
41 A
HI
/
—
/’ \
/l\
MED
Appearance may vary.
Medium
High
SURFACE COOKWARE TIPS
following information help
cookware which good performance.
Porcelain/enamel:
Good performance only with a thick. flat, smooth
bottom. Avoid boiling dry, porcelain can melt
fuse to the
Glass-ceramic:
Poor performance. May the Usable.
but not recommended.
Stoneware:
Poor performance. May scratch the surface.
Cast
Poor performance. May scratch the surface.
9