Garmin STYLUS PRO PRO WT7900 - Manual (Page 11)

NETWORK SETUP NETWORK SETUP DISABLE, ENABLE
IP ADDRESS SETTING AUTO, PANEL
IP, SM, DG SETTING IP address, subnet mask, default gateway
BONJOUR ON, OFF
INIT NETWORK SETTING Resets all network settings
OPTIONS SETUP Spectro Proofer Displays status of various parts and performs device alignment
PAPER SETUP ROLL PAPER REMAINING Setting appears only when no paper is loaded
REMAINING PPR SETUP OFF, ON
ROLL PAPER LENGTH From 15 to 300 ft
ROLL LENGTH ALERT From 4 to 50 ft
PAPER TYPE Media type loaded in the printer
CUSTOM PAPER Paper No 1 to 10
PAPER TYPE Media type loaded in the printer
PLATEN GAP STANDARD, NARROW, WIDE, WIDER
THICKNESS PATTERN PRINT
PAPER FEED ADJUST -0.70% to 0.70%
DRYING TIME 0.0 sec. to 10.0 sec.
PAPER SUCTION STANDARD, -1, -2, -3, -4
SET ROLL PAPER TENSION STANDARD, HIGH, HIGHER
REMOVE SKEW ON, OFF
HEAD ALIGNMENT PAPER THICKNESS
SELECT PAPER TYPE Media type loaded in the printer.
SELECT THICKNESS 8 mil (0.2 mm), 4 mil to 60 mil (0.1 to 1.5 mm)
ALIGNMENT
AUTO
UNI-D, BI-D, BI-D #1, BI-D #2, BI-D #3
Control Panel Menus (continued)
10