beautypg.com

Garmin STYLUS NX125 User Manual

Start here, Unpack, Turn on

background image

Start Here

2

Lower the output tray, then open the extension.

3

Flip the feeder guard forward.

4

Squeeze the edge guide and slide it to the left.

5

Load paper against the right edge guide and behind the
tab, with the printable side face up.

4 x 6

8½ x 11

Read these instructions before using your printer.

1

Unpack

Power cord

Epson Stylus NX125/127

Series

Quick Guide

Basic Copying, Printing, and Scanning

Maintenance

Solving Problems

®

Caution:

Do not open the ink cartridge package until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials.

2

Turn on

1

Connect the power cable.

Caution:

Do not connect to your computer yet.

2

Press

the

power button.

3

Install ink cartridges

1

Open the document cover, then open the ink cover.

Caution:

Don’t try to remove the ink cartridge guard or you may

damage the printer.

2

Shake the ink cartridges, then unpack them.

3

Remove only the yellow tape from each cartridge.

Caution:

Don’t remove any other seals from the cartridges.

4

Insert the cyan ink cartridge, and press it down until it clicks.

5

Press the

stop button. The cartridge holder moves.

6

Repeat steps 4 and 5 for other cartridges.

7

Close the ink cover, then close the document cover and
press the

stop button again.

8

Ink priming takes about 2 minutes. When the green power
light stops blinking, priming is complete.

Note:

Your printer ships with full cartridges and part of the ink

from the first cartridges is used for priming the printer.

Caution:

Don’t turn off the printer while it is priming or you’ll

waste ink.

4

Load paper

1

Open the paper support, then pull up the extension and tilt
it back slightly.

Epson Stylus

®

NX125/127 Series

4119074 Rev.0
1-F

C

4119074 Rev.0
1-F

M

4119074 Rev.0
1-F

Y

4119074 Rev.0
1-F

K