Goodman Mfg SS-GSH10C - Manual (Page 3)

p
RoduCt
S
pECifiCationS
p
RoduCt
S
pECifiCationS
SS-GSH10C www.goodmanmfg.com 3
S
pECifiCationS
GSH10
0903A*
GSH10
0903B*
GSH10
1203A*
Nominal Capacities
Cooling (BTU/h)
87,000 90,000 110,000
Heating (BTU/h) 84,000 84,000 100,000
EER/IEER 11/-- 11/11 11/11.5
Decibels 76 76 77
Compressor
RLA
25.6 25.6 30.1
LRA 196 196 225
Condenser Fan Motor
Horsepower
1 1 1
FLA 5.6 5.6 5.6
Refrigerant Lines
Liquid Valve Size (“O.D.)
⅝" ⅝" ⅝"
Suction Valve Size (“O.D.) (7½ tons) 1⅜" 1⅜" 1⅜"
Suction Valve Size (“O.D.) (10 tons) 1⅝" 1⅝" 1⅝"
Valve Type Sweat Sweat Sweat
Electrical Data
Voltage/Phase
208-230/3 208-230/3 208-230/3
Minimum Circuit Ampacity¹ 37.6 37.6 43.2
Max. Overcurrent Protection² 60 60 70
Min / Max Volts 197/253 197/253 197/253
Electrical Conduit Size ½" or ¾" ½" or ¾" ½" or ¾"
Ship Weight (lbs) 254 254 315
¹ Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require
larger wire sizes
² May use fuses or HACR type Circuit Breakers of the same size as noted
Notes
• Always check the S&R plate for electrical data on the unit being installed.
• Installer will need to supply 1⅛” to 1⅜” or 1⅛” to 1⅝” as appropriate.
• Unit charge with dry nitrogen/helium; must safely dispel holding charge from unit. Evacuate and charge with
R-22 per Installation Manual.
• Installation of these units requires the specified TXV Kit to be installed on the indoor coil. THE SPECIFIED TXV IS
DETERMINED BY THE OUTDOOR UNIT NOT THE INDOOR COIL.