Grundig YB500 - Manual (Page 3)

3
Yacht Boy 500 - LC DATA MONITOR (Display)
I n d i c a t i o n ( 1 ) - ( 1 8 )
1 8-digit alphanumeric display for
- Station name
Appears automatically when receiving an FM (VHF)
station which is transmitting RDS (Radio Data System)
signals. For other stations, you can enter a name of your
choice.
- LW (Longwave), MW (Mediumwave), SW (Shortwave),
and FM (VHF) : waveband, frequency.
- Programming functions
e.g., △ MENU ▽ , ON 1, OFF 1, etc.
- Hints (marked by ＊)
e.g., ＊ LOCKED, ; ＊ NO RDS, Q - - (RDS quality), etc.
- Error messages (marked by ＊＊) e.g.,
e.g.,＊＊ MEMORY, ＊＊ FREQ, etc.
- Automatic switch-on times.
2 (FM stereo reception).
3 TUNING (field strength indication)
4
(Key-protect= key locking).
5 BOOST (increased output power).
6 TIME I1/TIME II (related to the indication ).
7 - Clock times (TIME I/TIME II), SLEEP time (go-to-sleep
time), alarm times.
8
- one SLEEP time (go-to-sleep time) is programmed. -
SNOOZE (alarm interrupt) is activated.
9 (battery check)
10 Symbols for alarm modes (wake-up by radio
programme or alarm sound signal alarm time 1).
1 1 Symbols for alarm modes (wake-up by radio
programme or alarm sound signal alarm time 2).
12 1 - 40 MEMORY (number of station memory location).
13 1 - 9 ROM (ROM table is selected).
14 SW-Meter-Band
AS (AUTO SEARCH) = Automatic Station search.
0 = Tuning memory.
AF = RDS Alternative Frequency.
15 LSB (Lower Side Band):
Lower side bond on SSB reception.
SSB = Single Side Band.
16 RDS (Radio Data System): You are receiving an FM
station broadcasting RDS signals.
17 USB (Upper Side Band)
Upper side band on SSB reception.
18 MHz - kHz (frequency)
In MHz on FM (VHF), in kHz on AM (LW, MW, SW).