Giro Helmet - Manual

YOUR OWNER’S MANUAL
Please Read Carefully
• This helmet is intended only for pedal cyclists, skateboarders or rollerskaters,
as specified in the helmet marketing. It is not intended for motorsport,
moped or other uses.
• Any helmet subjected to a violent impact should be discarded and destroyed,
although helmet damage may not always be evident. In addition, it is
recommended that helmets be replaced after three years from the date of
purchase, or if it does not fit you any more. Since this helmet is made of
expanded polystyrene foam, there’s a chance it may be penetrated by sharp
objects.
• Do not modify or remove any original component parts of your helmet, other
than as recommended by Giro. Doing so voids all Giro warranties. Some Giro
styles of helmet are supplied with a removable visor. The attachment of these
visors is not detrimental to the helmet material. While the visors themselves
do not offer impact protection, they do not influence the safety performance
of the helmets.
• No helmet can protect the wearer from all foreseeable accidents, including
those involving bicycle to motor vehicle collisions. Depending on the type of
impact even a very low speed accident can result in a serious head injury or
fatality. This helmet is designed to protect the head and cannot guard against
cervical, spine or other bodily injuries that may result from an accident.
• The helmets should not be used by children while climbing or in other play
activities, where a risk of strangulation exists.
• Please exercise care and good judgment whenever you ride. Comply with all
traffic regulations and do your part to avoid accidents of any kind.
HOW TO FIT YOUR HELMET
A Giro helmet can only protect you if it fits well. Make sure you try on different
sizes and choose the size which feels secure and comfortable on your head. If
properly fitted, this helmet is designed to stay on your head in an accident.
1
ENGLISH