Connecting wires to terminals, English – Kenwood KRC-31 User Manual
Page 24
English
— 24 —
–
+
+
+
+
+
— 24 —
9
Rear right output (Red)
8
Rear left output (White)
KENWOOD disc changer input
25
FM/AM
antenna input
10
To connect the Disc
changer, consult your
Disc changer manual.
26
Wiring harness
(Accessory1)
13
TEL mute terminal
28
Fuse (10A)
23
Plug (page 25)
24
29
White/Black
32
Gray/Black
35
Green/Black
38
Purple/Black
White
31
Gray
34
Green
37
Purple
40
To front left
speaker
31
To front right
speaker
33
To rear right
speaker
39
To rear left
speaker
37
Ignition wire (Red)
17
Battery wire (Yellow)
18
Ground wire (Black) - (To car chassis)
19
Ignition key
switch
5
Car fuse box
(Main fuse)
6
ACC
15
Car fuse box
16
Battery
7
Power Control
terminal (page 26)
22
Power control/ Motor antenna
control wire (Blue/White)
14
4
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
If no connections are made, do not let the wire come
out from the tab.
3
Antenna Cord (ISO)
11
Connecting Wires to Terminals
Car’s wiring
harness
10
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
2
To Power Control terminal
4
Special antenna adapter
(Commercially available)
3
For Volkswagen car
1
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
12
KRC-394(E2)_U.S r1 02.9.26 7:29 PM Page 24