Follett Symphony 50HI400A 23 - Manual (Page 19)

25CI400A/W • 25HI400A • 50CI400A/W • 50HI400A 19
Gearmotor replacement
1. Disassemble evaporator as described above.
2. Disconnect the wire connectors.
3. Remove four screws holding gear motor mounting
plate to base of icemaker and lift gearbox and motor
clear of icemaker.
4. Remove machine screws holding mounting plate to
motor.
5. Install new motor in reverse order.
Fan removal
Fig. 29
29.2
29.1
1. Remove screw securing refrigerant lines to
condenser shroud (Fig. 29.1)
2. Remove seven screws securing shroud to
condenser (Fig. 29.2).
3. Slide shroud forward against fin block to access
fan and motor.