Furuno FAR-2XX7 - Manual (Page 2)

The dual function keypad shown below can be used to initiate direct actions, or to
access numbered menu items (or enter numbers) when in the menu mode. When
no menus are open, the function (Shown below the number) will be performed.
Temporarily
hides HL OFF
line in target
area
Switches
between true
or relative
ARPA and
AIS target
vectors
Lets operator select or
offset own ship’s
reference point in
target area
Changes ARPA and
AIS vector time,
(longer or shorter)
Lets operator offset or
move Electronic
Bearing Line to
measure bearing from
one target to another
In course up mode,
resets orientation so
current Heading is at
the top of the screen.
In true-motion mode,
resets own ship’s
position on screen.
Changes
orientation of
screen, switches
between North
up, Course up,
Heads up, etc.
Short / Momentary
press changes trail
length or time, long
press will erase
accumulated target
trails from screen.
(Will continue to paint
new trails)
Changes
monitor color
scheme
Short press
(momentary) is used
to select IL1 or IL2, a
long press toggles the
selected IL on/off.
Shows / hides
AIS target list
Creates a
mark at
cursor
position when
pressed