FUNAI MSD126 - Manual (Page 11)

-11- EN
1
Press [SEARCh MODE]
repeatedly until the Time
Search display appears
during playback.
2
Press the desired time
location on the disc, using
the Number buttons within
0 seconds.
1
Press [SEARCh MODE] repeatedly until the marker display
appears.
2
Use [s / B] to select
markers.
3
Playback will restart from
the specific point which
you have set as the
desired marker.
ENTER ENTER
1:29:00 TOTAL
1
Press [SEARCh MODE] repeatedly until the marker display
appears during playback.
2
Use [s / B] to select the
markers.
3
Press [ENTER] to set the
markers.
Using Time Search
1:29:00 TOTAL
Hint
• When there is no need to enter a number, “0” appears automatically.
For example, “0 : 0 - : -- ” appears in the Time Search display if the total time
of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
1 2 3
4 5 6
7 8 9
0
This feature allows you to assign a specific point on a disc to be
called back later.
To set a marker
ENTER ENTER
1
Press [RETURN ] to exit the marker display.
RETURN
SEARCH
MODE
Hint
• Opening the disc tray or putting unit in standby mode will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the
marker later” will also erase all markers.
• To clear a marker, select the marker to be cleared at step 2 in the section “To
set a marker” or “To return to the marker later,” and then press [CLEAR].
• The marker display will disappear in about 0 seconds when there is no output.
Search Function
To return to the marker later
Functions
To exit the marker display
SEARCH
MODE
PLAY
STOP
Marker Setup
ENTER
ENTER
SEARCH
MODE
PLAY
STOP
MSD126_E6AB5UD.indd 11 2006/01/06 15:25:51