Freud Tools FT3000VCE - Manual (Page 9)

8
English
SYMBOLS
Some of the following symbols may be used on your tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
no
No load speed Rotational speed, at no load
.../min Revolutions or reciprocation per minute Revolutions, strokes, surface speed,
orbits, etc. per minute
Class II construction Designates double insulated construction
tools
Alternating current Type or a characteristic of current
Safety Alert Precautions that involve your safety
Power Source Single-Phase, 120V, AC 60Hz
Amps 15
Watts 1900
No-Load Speed 8,000-21,000 RPM
Collet 1/4 Inch & 1/2 inch
Max Bit Diameter* 3-1/2 inch (88.9 mm)
Weight 13.1 lbs
SPECIFICATIONS
*Router bits over 1- 1/2 ” diameter should be used only with the router mounted in a router table. The router base
plate must be removed to to accept bits larger 2 1 / 2 ” diameter. Consult the router table’s user manual for maximum
bit diameter that can be used in the router table
English FT3000 Manual.indd 8 English FT3000 Manual.indd 8 10/18/06 11:57:31 AM 10/18/06 11:57:31 AM