Firstech, LLC. COMPUSTAR CM3000 - Manual (Page 6)

Firstech, LLC. Technical Data (CM3000)
6
Connector #4:
Pin #1: No Connection
Pin #2: Violet/White- this wire is the (-) 200mA trunk release. The
following sequence takes place each time the trunk release output is
triggered:
1. CompuStar disarms alarm and unlocks doors
2. Trunk output is triggered
Pin #3: Orange/Black- This wire provides you with the capability of
adding driver’s door priority unlock similar to factory keyless entry
systems. Please note that this feature requires more advanced
installation. Please call Technical Support for details.
Pin #4: Blue- This wire is the (+) lock output that doubles as a
(-) unlock output.
Pin #5: Blue/Black- This wire is the (-) lock output that doubles as a
(+) unlock output.
Pin #6: No Connection
Connector #5:
Pin #1: Orange- This is the Rearm wire. It provides you with a (-) pulse
when armed, after remote start and then again one second after remote
start shuts down.
Pin #2: Orange/White- This is the Disarm wire. It provides you with a
(-) pulse when disarmed and before remote start.
Pin #3: Violet- This is the Dome light Supervision wire. It provides a
(-) 200mA pulse to turn the dome light on for one minute after unlock.
Please note: This feature is not available in manual transmission mode.
Pin #4: Brown- This is the (+) siren output wire. Connect this wire
directly to the red wire on the siren.
Pin #5: White- This is the (-) 250mA horn honk output wire.