FRIGIDAIRE 242008000 - Manual (Page 6)

6
IMPORTANT
To ensure proper installation of handles, please review
these instructions and illustrations thoroughly prior to
installing the handles.
Additionally, before installing the door handles, make
sure the door swing is correct. Your model will have
either a right hand or left hand door swing. Follow
instructions in the Use & Care Guide to reverse the
doors, if necessary.
DOOr rEMOVAL INSTrUCTIONS
To attach refrigerator handle:
1 Place rounded part of handle onto shoulder screw
on face of door and align the two (2) holes in top
of handle with the two (2) holes in top of door. Do
not tighten the set screw yet.
2 Install the two (2) screws into the top of the handle.
3 Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
CAUTION
Wear gloves and use extreme CAUTION when installing
these handles. The rounded end of the handles may
be sharp.
To attach freezer handle:
1 Place rounded part of handle onto shoulder screw
on face of door and align the two (2) holes in
bottom of handle with the two (2) holes in bottom
of door. Do not tighten the set screw yet.
2 Install the two (2) screws into the bottom of the
handle.
To reverse refrigerator/freezer handles:
Handles may be easier to reverse while doors are off.
Reverse freezer and refrigerator handles as shown.
CAUTION
Be sure doors are set aside in a secure position where
they cannot fall and cause personal injury.
3 Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.