Fisher-Price KART M5130 - Manual (Page 11)

• With the flag pointing toward the front of the
seat, insert the flag pole down through the
hole in the top of the seat.
• Turn the flag pole so that the flag is toward
the back of the seat.
• Insert two #8 x 3 /
4
" screws through the flag
pole and into the back of the seat as shown.
Tighten the screws.
Seat
Flag Pole
Action Sounds Box
A
B
Tabs Tabs
Slots Slots
Action Sounds
Box Cover
Action Sounds Box
B
Wrap
Flap
Wrap
Flap
A
B
10
• Flatten the "T" end of one of the seat belts.
• Insert the "T" end of the seat belt through one of the slots in the seat.
• Pull up on the seat belt to be sure it is secure.
• Repeat this procedure to assemble the other seat belt to the seat.
7
8
9
11
ASSEMBLY F
M5130pr-0920
• Fit the action sounds box to the action sounds box cover .
• Wrap the cover flaps around the action sounds box, as shown . A
B
• Insert the bottom tabs on the action sounds box into the slots
in the inside of the front end of the vehicle .
• Push the action sounds box to "snap" the action sounds box
into place .
Hint: To remove the action sounds box when replacing batteries,
insert a slotted screwdriver into the slot at the top of the action
sounds box. Pull to remove the action sounds box.
A
B
Slot
“T” End
Seat Belt