Home theater – Focal PROFILE Portable Speaker User Manual
Page 7

Magnetic disturbance
In home theater systems, the magnetic 
radiation of the loudspeakers must be 
taken into consideration.
Floor-standing speakers which are 
fully magnetically shielded, all other 
loudspeakers generate a magnetic 
leak that can interfere with household 
appliances, some of which are 
sensitive to this phenomenon. It is 
strongly advised not to place front 
loudspeakers closer than 50cm to 
your TV screen.
Frame geometry as well as colours 
can be severely distorted by a 
magnetic field if the loudspeaker is 
placed to close to the TV. In case 
of problems, some TV screens (or 
computer monitor) feature a degauss 
control, but not systematically.
07
Home theater
English
Choice of speakers
Yours 
loudspeakers
have
been
engineered to work with stereo 
systems as well as with home theater 
systems. If you already own a pair 
of stereo Profile loudspeakers and 
wish to purchase a complete home 
theater system, it is of the utmost 
importance that you use the central 
and effect loudspeakers of the same 
product line. It is the sole possible 
condition to bring to your system a 
perfect tonal homogeneity and a 
realistic and coherent reproduction 
of tri-dimensional effects within the 
listening room.
Central channel placement
Central channel speakers should 
be placed close to the TV-screen to 
obtain a proper placement and a 
realistic reproduction of the dialog. 
They could be placed below or above 
the TV-screen if your TV-unit permits 
(fig. F, G).
If a standart projection screen is used, 
the central channel speaker must be 
placed under the screen.
If an acoustically transparent pro-
jection screen is used, the central 
channel speaker can be placed 
behind and at the bottom of the 
screen (fig. H).
Effect channel speakers‘s place
The soundtrack mix for a film or music 
encoded in multichannel format is 
very complex and allows the listener 
to benefit from a wide range of special 
sound effects, which require the use of 
effect channel speakers. In order to 
obtain a realistic 3D soundstage, the 
placement of the speakers is decisive, 
even when confronted with a restrictive 
disposition of the listening room.
For enhanced performances, the fol-
lowing elements should be noted.
Avoid placing the effect speakers 
too far from the listening area 
otherwise the sound perception will be 
altered. In order to obtain surround 
effects, with great sound density we 
advise you to place the speakers 
against the sidewalls on each side of 
the listening room (fig. I, J).
Place the effect speakers at a 
suitable height, slightly above the 
listener’s ears (fig. K).
A
/
V amplifiers include compen-
sation systems, which allows to 
set the delay applied on each 
channel. In certain conditions, the 
distance between each speaker and 
the listening area may vary.
The latest high-level film soundtracks 
are now mixed in 6.1. This system 
requires the use of one or two 
central surround channel speakers 
(depending on the amplifier) which 
should be placed behind the listening 
area. If two effect speakers are used 
simultaneously, make sure that they 
are not too far from each other (less 
than one meter; 40 inches) in order to 
obtain the best results.
notice profile gb 6
12/04/05, 12:06:08
