FUJITSU 280X1024@75Hz - Manual (Page 5)

INSTALLATION INSTALLATION
2. Installation 2.4 Power on
Turn on the monitor and computer, and then indicator will light green (or blue)
when the screen is under normal condition. Please check to see if there is any
wrong with the connection of video signal cable if the indicator lights red.
2.5 Self-inspection
If the monitor inspects there is no horizontal and vertical signal, it will prompt to
check the video input, please refer to the illustration below, and the monitor will
enter into power saving mode after several
5 Installation hole for wall hanging
1 VGA signal input jack
2 DVI signal input jack
3 Power jack
4 Audio input jack
seconds, the indicator will light red. The
screen will restore to normal display once
receiving video signal.
2.6 Image Adjustment
NO SIGNAL
Please adjust the image according to your need; please refer to the "Operation"
in Section Three.
1 VGA signal input: connect to computer VGA signal output jack
2 DVI signal input: connect to computer DVI signal output jack
3 Power jack: connect to adaptor DC output jack
4 Audio input: connect to computer sound card audio output jack
2.1 Connection of signal cable
Before connecting your monitor and PC with signal cable, please turn off your
monitor and computer. And then insert one end of the signal cable into the VGA
or DVI jack on your computer, and lock it with two fixed screw for ensured
grounding. Finally, please insert another end of signal cable to the VGA or DVI
signal input jack of monitor and lock it with fixed screw.
2.2 Connection of power cord
First, insert one end of power cord into the input jack of adaptor, and another end
into power outlet, then insert the output terminal of adaptor into the power input
jack of monitor.
2.3 Connection of Audio cable
Please insert one end of audio cable into the sound card audio output terminal on
your computer, another end into the audio input terminal of monitor.
page 5 page 6