Photography menu – FujiFilm FinePix A405 User Manual

Page 16

Advanced

Features

PHOTOGRAPHY MENU OPERATION

1 Press the “MENU/OK” button to display the menu.
2 Press “d” or “c” to select the menu item and

“a” or “b” to change the setting.

3 Press the “MENU/OK” button to confirm the

selection.

When you enable the setting, an icon appears in
the top-left corner of the LCD monitor.

●

The settings available in the menu screen vary depending on
the Still photography mode.

PHOTOGRAPHY MENU

STILL PHOTOGRAPHY MENU

✽ SELECTING a AUTO /s MANUAL (➡P.29)

Choose from 4 settings. Use the table below as a
guide for selecting the best setting.

y QUALITY SETTINGS IN STILL PHOTOGRAPHY MODE

●

The numbers to the right of each setting show the number of
available frames.

●

When you change the quality, the number of available frames
also changes (

➡P.21).

Printing at A4 or A5 size or printing part of the image cropped at A6 size.

Quality mode

4 MB (2304

× 1728)

Best for A6 or A5 size prints.

2 MB (1600

× 1200)

Best for A6 size prints.

1 MB (1280

× 960)

For an image attached to E-mail or used on a website.

0.3 MB (640

× 480)

Sample Uses

The self timer is used in situations such as group
shots where the photographer is included in the
shot.
Setting the self-timer to “ON”, “*” appears on the
LCD monitor.
In this mode, a timer runs for roughly 10 seconds
before the shutter is released.

1 Position the AF frame over the subject.
2 Press the Shutter button down halfway to focus

the shot.

3 Without releasing the Shutter button, press the

button all the way down (fully pressed) to start
the self-timer.

Beep

* SELF-TIMER PHOTOGRAPHY

●

The self-timer is automatically switched off in the following
situations:
i When shooting ends
i When the camera is switched to“a” or “s” mode
i When the Mode switch setting is moved to another setting
i When the camera is switched off

●

The AF/AE lock can be also used (

➡P.22).

●

Take care not to stand in front of the lens when you press the
Shutter button as this can prevent the correct focus or
brightness (exposure) being obtained.

The self-timer lamp lights steadily for roughly 5
seconds and then blinks for another 5 seconds,
after which the shot is taken.

A countdown is displayed on the LCD monitor
indicating the time remaining until the picture is
taken.
Self-timer mode is automatically cancelled after
each shot.

●

To stop the self-timer, once it has started running, press the
“BACK” button.