FilterStream V2100 User Manual
Page 12
12
C L E A N I N G T I P S
Your DirtTamer
™
V2100 vacuum will be more
effective at cleaning up spills if you adhere to the
following procedures:
C A R P E T C L E A N U P S
1. Immediately vacuum up as much of the spill as
possible.
2. For oily spills, work some low sudsing carpet
shampoo into the area according to the
directions on the shampoo container (do not
use solvent based cleaners). Vacuum up
shampoo and spill residue, then proceed to
step #3 below.
For water soluble spills, dampen the spill area
using a spray bottle of cold, clean water. Be
careful not to saturate the carpet.
3. Work water into the nap of the carpet.
4. Vacuum up water and spill residue.
5. Repeat the above procedure if necessary.
6. Cover the cleaned spill area with several layers
of paper towels or a terry cloth towel. Step on
the towels several times to soak up the moisture.
7. Brush up the nap of the carpet.
U P H O L S T E R Y C L E A N U P S
1. Immediately vacuum up as much of the spill as
possible.
2. Follow your furniture manufacturer’s instructions
for spot cleaning upholstery.
Note: Never use flammable cleaners with your
vacuum.
EMPTYING/CLEANING PRE-FILTER AND BOWL
Liquids, dirt and debris (wet and dry) picked up by
your vacuum will collect in the Pre-Filter and Bowl.
To empty/clean these parts,
please follow these steps:
(a) Holding the Bowl with
one hand and the
Handle/Housing with the
other, depress the Bowl
Latch and swing the Bowl
away from the
Handle/Housing.
(b) While holding the Bowl in
one hand, remove the
Pre-Filter with your other
a
b
M A I N T E N A N C E