FilterStream V2100 User Manual

Page 11

H O W T O U S E Y O U R D I R T T A M E R

™

C O R D L E S S V A C

Remove your vacuum from the Charging Base

and slide the On/Off Switch to the “On”
position to operate. Slide the On/Off Switch to
the “Off” position between cleaning tasks to
conserve power.

P I C K I N G U P D R Y D E B R I S
Use your vacuum for picking up dirt, dust, food
crumbs, etc. from counters, bare floors, rugs,
automobile interiors, upholstered furniture, etc.
After dry pickups, empty and clean the Bowl and
Foam Filter before picking up liquid or wet spills.

Note: If using a HEPA Filter in place of the Foam

Filter, shake loose, or brush off any dust or debris
from the HEPA Filter if you notice any build-up.
DO NOT WASH OR RINSE THE HEPA FILTER,
as this may damage the HEPA material.

If the HEPA Filter accidentally gets wet from

vacuuming wet spills, remove the HEPA Filter, pat
it dry with a paper towel, and allow it to
thoroughly air dry before next use.

P I C K I N G U P L I Q U I D S
O R W E T D E B R I S
Use your vacuum to pick up
liquids or wet debris. For ideal
performance, we recommend
the use of the Foam Filter for
liquid debris.
(a) For liquid pickups, insert the

Squeegee into the Bowl
Nozzle and pull the Squeegee
through the liquid.

(b) Do not fill the Bowl beyond

the end of the Pre-Filter
(about 9 oz. of liquid). If there is any liquid in
the Bowl, hold the Bowl Nozzle down to avoid
leakage. Tipping the Bowl Nozzle up may
cause the liquid to enter the fan area.

juice, etc.), empty your vacuum’s Bowl and Pre-
Filter immediately and thoroughly clean the
Bowl, Pre-Filter, Filter Cover and Foam Filter to
prevent mold and mildew from forming.