Franklin ATH-2011 - Manual (Page 12)

Cartridge Care
• Do not expose the book car-
tridges to heat, cold, or liquids.
• Do not put excessive pressure
on the book cartridges.
LBS.
• Do not touch the metal con-
tacts on the book cartridges.
Caution: Touching these electrical
contacts with statically charged ob-
jects, including your fingers, could
erase information entered in a car-
tridge or built-in book.
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below.
Warning: Pressing the reset button
with more then very light pressure may
permanently disable your BOOKMAN.
In addition, resetting BOOKMAN erases
settings and information entered into its
built-in book and in an installed cartridge.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
reset button on BOOKMAN.
The reset button is recessed in a pin-
sized hole on the back of BOOK-
MAN. Look for it on the battery
cover or near the cartridge slot.
➤ Troubleshooting Tips
• Check that the book cartridge,
if any, is installed correctly.
• Check that the cartridge’s metal
contacts are dirt-and dust-free.
11