Fisher-Price C1454 - Manual (Page 5)

• Position the base assembly so that the base door is facing you.
• Position Ferris wheel assembly so that the decorated side is facing you.
• Fit the hub on the end of one ramp onto the track as shown.
• Bend the track slightly and fit the other hub to the opposite side of
the track.
5
7
• Position the Ferris wheel assembly so that the back is facing you.
• Fit one of the ramps on the back of the Ferris wheel assembly
as shown.
• Insert four #8 x 1 /
2
" screws through the ramp and into the Ferris wheel
assembly. Tighten the screws.
• Repeat this procedure to attach the other ramp to the Ferris wheel.
Ramp
Track Base Door
Hub
Ferris Wheel Assembly
Ramp
#8 x 1 /
2
" Screw
#8 x 2" Shoulder Screw
9
Hub
8
• Rotate the Ferris wheel down toward the base. The arch should “click”
in place.
• Insert a #8 x 2" shoulder screw into the hub on the end of one ramp.
Tighten the screw.
• Insert the other #8 x 2" shoulder screw into the opposite hub. Tighten
the screw.
Ferris Wheel
Ferris Wheel
Assembly