FUJITSU PDS5004U - Manual (Page 20)

E-17
SELECTING INPUT MODE
Press to select a desired input
mode.
Each time you press , a different input mode
appears. The sequence is as follows:
Video: Displays pictures from equipment
connected to the Video terminal.
S-video: Displays pictures from equipment
connected to the S-video terminal.
Comp.video: Displays pictures from equipment
connected to the component video
input terminal.
* When RGB-PC is selected in BNC Input mode,
Comp. video mode can not be input.
(See P.E-35.)
1
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
VIDEO INPUT MODE
RGB INPUT MODE
S-video mode
Comp.video mode
Press to select a desired input
mode.
Each time you press , a different input mode
appears. The sequence is as follows:
RGB1:Displays pictures from equipment
connected to the RGB1 (DVI-D) terminal.
RGB2:Displays pictures from equipment
connected to the RGB2 (mD-sub) terminal.
RGB3:Displays pictures from equipment
connected to the RGB3 (BNC x5) terminal.
* When Comp. video is selected in BNC Input
mode, RGB3 mode can not be input.
(See P. E-35)
1
RGB2 mode
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
RGB1 mode
English