FujiFilm Yakumo DVD Travelle - Manual (Page 8)

Page 4 of 35 pages
YAKUMO DVD TRAVELLER 8.0 ENGLISH
The 8 Inch TFT color LCD Monitor
1 - Button light On/Off
2 - Mute
3 - Screen mode: Upside-down / Normal
4 - Menu Selection: Brightness, Contrast, Volume Switch
Press the [MODE] button to toggle between Brightness, Contrast, and
Volume, and adjust the level with the [+] or [-] button
5 - Volume decrease / Adjust decrease
6 - Volume increase / Adjust increase
Press the [+] or [-] button to increase or decrease the sound volume of the
built-in speaker
7 - ON / OFF (Standby) Switch
Press the [ON/OFF] button to power on or off the TFT color LCD Monitor
8 - Audio/Video / 12Vdc USB style connector *
9 - 3,5mm Headphones jack
Connect a headphone to listen to the sound without disturbing others
10 - 12V DC connection (not used)
Note:
• * Do not connect the screen to a computer USB port, this might damage the TFT LCD Monitor
or your computer. The USB connector is specially designed for the Yakumo DVD Traveller 8.0
and may only be used with this product.
• The TFT color LCD is made of glass and liquid, do not apply pressure on the screen to
prevent breakage and poor image quality.
• Do not scratch the screen surface with hard materials and only clean with a soft dry cloth.
1 2 3 4 5 6 7
8
9
10
• 8 Inch Large Screen (4:3) TFT color LCD with Digital
Video driver board
• Built-in speaker
• 3,5mm Headphone jack
• Resolution: 960 (H) x 234 (V)
• Brightness 400cd/m²
• View angle 55,15,35°
• PAL or NTSC Video input: Composite Video Signal
1Vpp / 75 Ohm
• Audio input: 1Vpp at 10K Ohm
• Operating Voltage: 12V DC
• Power Consumption: ±9W
• Weight: ±0,5Kg
• Dimension: 205 x 163 x 30mm
• Operating temperature 0 ~ +60°C