Windows nt 3.51 – Farallon Communications NetopiaTM User Manual
Page 15
Installation
15
W
INDOWS
NT 3.51
1.
Open the Accessories and select Terminal.
2.
From the Settings menu, select Communications, and the follow-
ing screen will appear:
3.
Select a COM por t from the Connector list and click OK.
4.
Type the following command:
ATI8
If the response “Farallon Communications, Inc. Netopia ISDN PC
Card” is returned, then the correct COM por t for the Netopia ISDN
PC Card has been selected.
If no response is returned, repeat steps 3 and 4 with another
COM por t until “Farallon Communications, Inc. Netopia ISDN PC
Card” is returned.
5.
Go to Chapter 3, “Windows Configuration Tool,” and continue from
there.