First Alert SA305B - Manual (Page 2)

brkelectronics.com
ARCHITECTURAL AND ENGINEERING SPEC
TOP
VIEW
1.9”
INSTALLATION OF ALARM
The smoke alarm shall be a First Alert Model SA303 (cat no. SA303B and SA305B)
and shall provide at a minimum the following features and functions:
1. A dual ionization sensing chamber.
2. The unit shall be capable of self restoring.
3. A fully screened sensing chamber to resist entry of small insects
thereby reducing the probability of unwanted alarms.
4. Powered by a supervised 9V battery and a solid state piezo horn
rated at 85dB at 10 ft. Cat no. SA303B features a carbon zinc battery and cat no.
SA305B features a lithium battery.
5. A visual LED power-on indicator to confirm unit is receiving power or
is in alarm.
6. A full function test button. The test button should check all alarm
functions by stimulating the chamber to simulate a smoke condition,
causing the unit to alarm and also has a silence feature to silence unwanted
nuisance alarms.
7. Two Locking features - tamper resistant locking pins that lock battery drawer
and/or alarm to mounting bracket.
9. The unit shall be capable of operating between 40°F (4°C) and
100°F (38°C) and relative humidity between 10% and 90%.
10. The unit shall contain mounting hardware and shall be listed for wall
or ceiling mounting.
11. The unit shall at a minimum meet the requirements of UL217, CSFM,
NFPA 72, NFPA 101, ICC.
12. The unit shall be suitable for use in Recreational Vehicles.
Installation of this smoke alarm must conform to NFPA 72. Always check your local
building codes. Follow all instructions for placement as outlined in the user’s manual.
SHIPPING SPECS:
TECHNICAL SPECS
Individual Carton Dimensions 5.65 ”L x 2.03”W x 5.46”H
Weight 0.54 lbs.
Cube 0.036 ft3
UPC SA303B: 0 29054 00095 8
SA305B: 0 29054 12310 7
Master Carton Dimensions 13.125”L x 5.810”W x 12.130”H
Master Pack 12
Weight 7.0 lbs.
Cube 0.535 ft3
UPC SA303B: 100 29054 00095 5
SA305B: 100 29054 12310 4
Pallet Information
Cases per Layer 25
Number of Layers 3
Cases per Pallet 755
Units per Pallet 900
Cube 47.3 ft3
Weight 590 lbs.
Alarm Dimensions: 4.34” dia x 1.9”H
Weight: 6.8 oz.
Operating Voltage: 9V Battery Powered (SA303B carbon zinc; SA305B lithium)
Temperature Range: 40F (4C) to 100F (38C)
Humidity Range: 10% to 90% relative humidity (RH)
Audio Alarm: 85dB at 10 feet
Test/Silence: Electronically simulates smoke condition,
causing the unit to alarm
Manual: Press and hold test/silence button
Alarm Reset: Automatic when smoke clears
Smoke Sensor: Dual Ionization
Indicator Lights/Sounds:
DC Power:
Intermittent Red Light
Alarm: Audio alarm, rapidly flashing red light
Listing: UL to UL217 Standard
SIDE
VIEW
BACK
VIEW
CAT.
SA303B/SA305B
©2009 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM2910
THE PARTS OF THIS SMOKE ALARM
BOTTOM OF ALARM
1. Mounting bracket
2. Mounting slots (1 of 2)
3. Locking Pins
4. Battery Drawer Latch
5. Battery Drawer - Install
9V battery here
TOP OF ALARM
1. Battery Compartment
2. Test/Silence Button &
Red Alarm Light
BATTERY DRAWER LOCK
Remove Pin
Push locking pin through
hole near battery drawer
on the back of the alarm.
1
2
3
2
5
4
3
4.34”