Installation instructions, Levelling your washer – Fisher & Paykel AquaSmart WL37T26C User Manual
Page 12
10
Levelling your washer
It is IMPORTANT to level the washer to ensure good spin performance and effective detergent and
bleach dispensing.
1
Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of
the washer.
2
Move the washer to its final position. (We suggest a minimum clearance of 1” (25 mm) each side).
3
Adjust the feet so the washer is level and cannot rock.
4
Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level.
Readjust the feet if necessary.
5
Open the lid and check the washer tub to see that it sits slightly forward of centre. (See Fig. 7).
Correct
adjustment
Incorrect
adjustment
Fig. 7
6
Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.
7
Uncoil power cord and plug into wall socket.
8
Check for leaks, noise, vibration, correct water temperatures and proper operation in spin. Check
that the lid locks during spin.
Adjustable feet
Rubber insert
Fig.5 Levelling your washer
1” (25 mm) 1” (25 mm)
Fig.6 Minimum clearances
Installation instructions