FUJITSU CG-311 SERIES - Manual (Page 14)

En-12
VIDEO OUTPUT
BNC OUTPUT
The output of this connector is a composite
Video Signal. Use a high quality 75
Ω
coaxial
cable between the camera and other video
equipment. At the “Video Equipment”end of
the coaxial cable, terminate the signal with a 75
Ω
resistor.
DIP SWITCH
NOTE:
7 is factory setup.
Fig. 7
#1:
#2:
#3:
#4: AGC
ESC
BLC
ECLP #5:
#6:
#7:
#8: AWB
SYNC
D/N
FL
#1: AGC OFF/ON #5: AWB HOLD/AUTO
#2: ESC OFF/ON #6: SYNC AUTO/INT
#3: BLC OFF/ON #7: D/N AUTO/HOLD
#4: ECLIPSEROFF/ON #8: FLICKERLESS ON/OFF