Hold, Saving samples – Fluke 922 User Manual
Page 19
Airflow Meter
Saving Samples
11
intermittent readings, record maximum and minimum readings while you are away or when
you cannot watch the Meter.
To use Min Max mode, press
M
. The maximum reading appears first. Each subsequent
press of
M
steps through the minimum, average, and live readings, and back to the
maximum reading.
To exit Min Max mode, press
M
for approximately two seconds.
When in Min Max mode,
the Auto-off feature is automatically disabled.
Hold
Pressing
H
captures the current reading and holds it on the display. If
H
is pressed
while in Min Max mode, the reading is held on the display and Min Max mode continues to
store minimum and maximum values.
Saving Samples
The Meter saves various samples in its three major modes. To save a sample, do the
following:
1.
When taking a sample, press
I
to store the sample. The Meter can save up to 99
samples in each of its three modes.
2.
Once the samples are taken, press
G
to view the average of all the samples.