FUNAI CR130TT8 - Manual (Page 16)

16
EN
O
PTIONAL SETTING
Picture Adjustment
You can adjust brightness, contrast, color, tint and sharpness.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K /L] to select “PICTURE”, then press [VOL X].
e.g.) digital TV mode
or
CH
CH
VOL
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
3
Use [CH K /L] to select the picture quality type you
want to adjust.
or
CH
CH
[BRIGHTNESS]
[CONTRAST]
[COLOR]
[TINT]
[SHARPNESS]
4
Use [VOL X /Y] to adjust the quality.
or VOL VOL
Selection [VOL Y] [VOL X]
BRIGHT to decrease brightness to increase brightness
CONTRAST to decrease contrast to increase contrast
COLOR to decrease color to brighten color
TINT to add purple to add green
SHARPNESS to make soft to make clear
5
Press [MENU] to exit.
MENU
Note:
• The picture adjustment setting display will automatically
disappear in 10 seconds.
5 Closed Caption
You can view closed captioning (cc) for TV programs, movies and news.
Closed caption refer to text of dialogue or descriptions displayed on-screen
for the hearing impaired.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K /L] to select “CAPTION”,
then use [VOL X /Y] to change the setting.
e.g.) digital TV mode
or
CH
CH
or VOL VOL
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
[OFF]
[CAPTION1]
[CAPTION2]
[TEXT1]
[TEXT2]
[Caption Mode]
CAPTION1 (C1) and TEXT1 (T1);
are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CAPTION2 (C2) and TEXT2 (T2);
are rarely available and broadcasters use them
only in special conditions, such as when “CAPTION1”
or “TEXT1” is not available.
• There are 3 display modes according to programs:
Paint-on mode: Displays input characters on the TV
screen immediately.
Pop-on mode: Once characters are stored in
memory, they are displayed all at
once.
Roll-up mode: Displays the characters continuously
by scrolling (max. 4 lines).
5