Furuno MU-150C User Manual
Page 9
2
Cover Display Unit
See Note 2.
Display unit and cover
3. Fasten the display unit to the mounting location with six tapping screws (5X30).
Note 1:
Hex head bolts may also be used to fasten the display unit. However, their
length must be at least 30 mm.
Note 2:
Use M5 bolt or tapping screw (nominal diameter: M5), although the size of the
mounting holes in the display unit is M8.
384
±0.5
366
±1
15
±0.5
333
±0.5
315
±1
259
±0.5
45
82
100
384
±
0.5
366
±
1
15
±
0.5
333
±0.5
315
±1
259
±0.5
45
82
100
Mounting dimensions for landscape orientation Mounting dimensions for portrait orientation
Unit: mm
Unit: mm
Mounting dimensions
4. Reattach the cover.
5. For the portrait model only, attach the FURUNO logo seal (supplied in the accessories)
at the top left corner. Remove the logo seal from the bottom left corner.