Furuno MU-150C - Manual (Page 19)

12
3.2 RGB Adjustment
Color may be adjusted with the following potentiometers. Turn the potentiometers clockwise
to increase color.
Model Potentiometer Setting
FCV-1200 Series, CH-250,
FR-1760DS Default setting
GD/GP-280/380/680, FCV-1500
Series, CH-37, CSH23/73/83,
FR-1500 MK3 Series Fully clockwise
R1: Red
R2: Green
R3: Blue
3.3 Brilliance Adjustment
Brilliance can be adjusted from the control unit of the FCV-1200 series or CH-250 by setting
jumper block J17 as below.
J17: Brilliance control circuit selection
1-2: Brilliance is adjusted from the MU-150C (default setting)
2-3: Brilliance is adjusted from the control unit of the FCV-1200 series or CH-250
Note: Do not change the setting of the J16 or J18. The default setting for both is “1-2”.
S1 S2 S3 S4
J16 J17 J18
R1
R2
R3
J16
J17
J18
R1
R2
R3
EXTBRILL
BRILL
BRTP
R
G
B
S1
S2
S3
S4
SEL
UP
DOWN
RESET 1 3 1 3 1 3
Jumper blocks