Fisher-Price TREEHOUSE 75972 - Manual (Page 5)

5
Assembly
• Stand the front trunk panel upright.
• Position the ladder panel so that the chalkboard is toward
the safe on the front trunk panel.
• Insert the hooked ladder panel tabs into the slots in the
front trunk panel.
Front Trunk
Panel
Ladder
Panel
Hooked
Tabs
Slots
Safe
Chalkboard
Helpful Hint: You may need the help of another person with
this assembly step.
• Turn the assembly upside down so that the ladder panel
rests on a flat surface.
• Lift the assembly up and pound the ladder panel onto the
surface to lock the tabs on the ladder panel into the slots
in the front trunk panel.
Front Trunk
Panel
Ladder
Panel
Slots
Tabs
• Position the front trunk panel on a flat surface with the
inside facing up.
Helpful Hint: The safe door may be difficult to attach to the
front trunk panel. Place a cloth under the front trunk panel
to protect the surface. Apply a small amount of liquid soap
to the pegs on the safe door.
• Position the safe door with the dial facing up. Insert the
safe door lower peg into the lower hinge hole in the front
trunk panel.
• Firmly push down on the safe door to snap the upper peg
into the upper hinge hole in the front trunk panel.
Front Trunk
Panel
Safe
Door
Lower
Peg
Upper
Peg
Lower
Hinge
Hole
Upper Hinge Hole
• Locate the ladder panel.
• Make sure the area where the chalkboard label will be
applied is clean and dry.
• Bend the chalkboard label in half lengthwise.
• Remove the backing from the upper half of the label.
• Align the bottom edge of the label with the bottom edge
of the chalkboard outline on the ladder panel.
• Apply the top half of the label to the ladder panel and
smooth the label downward.
• Remove the backing from the lower half of the label.
• Smooth the label downward.
Chalkboard
Label
Upper Half
Label
Ladder
Panel
Bottom
Edge